Slide Mounting Media
Electron Microscopy Sciences Fluoro Gel with Dabco 250 ML
Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. Use for immunofluorescence and confocal microscopy. Storage at 2-8 degree C is recommended
Hach Company Sanitary Mounting Kit, 3700 Series and pHD Sensors
316 Stainless Steel Sanitary 2-Inch Tee and Heavy Duty Clamp. For use with the sanitary style 3700-series inductive/electrodeless conductivity sensors.
Electron Microscopy Sciences Slide Coating Adhesive 100 ML
Prepared from 3-aminopropyltriethoxysilane in acetone. Good for coating glass slides to adhere paraffin sections for further processing without sections falling off from the slide. READY TO USE.
Electron Microscopy Sciences Sudan IV Staining Solution 500 ML
Used in Herxheimer's Technique for staining fat and cholesterol. References: Clark, G., Ed.: Staining Procedures; 3rd Ed.; Baltimore: Williams and Wilkins Co., c. 1973, p. 143 Conn's, H.J.: Biological Stains; 8th Ed., Baltimore: Williams and Wilkins Co., c. 1969, p.100
Electron Microscopy Sciences Fluoro-Gel Mounting Medium with Tris Buffer 20 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope.
Electron Microscopy Sciences Fluoro-Gel III Mounting Medium 20 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope. Contains PI (Propidium Iodide) a counterstain for DNA.
Electron Microscopy Sciences CytoSeal™ Mounting Medium 60 Mounting Medium 16 OZ
CytoSeal 60 and 280 are toluene-based mounting mediumformulated from acrylic resins that will not crack or discolor with age. An antioxidant has been added to the formulation to inhibit fading or yellowing of stained specimens. It will not become brittle and crack, nor will it discolor or yellow with age. CytoSeal can be dissolved in toluene or xylene. Low-viscosity medium dries quickly and spreads evenly and rapidily virtually eliminating air bubbles.
Electron Microscopy Sciences Citifluor™ Mountant Solution AF3, Glycerol Free, Non Hardening 100 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. PBS solution containing an amine-based antifadent.
Material: Glycerol Free
Type: Non Hardening
Electron Microscopy Sciences Fluoro-Gel III Mounting Medium 100 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope. Contains PI (Propidium Iodide) a counterstain for DNA.
Electron Microscopy Sciences Fluoro-Gel Mounting Medium with TES Buffer 100 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope.
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Plain Surface, 1/4" height, Aluminum
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Electron Microscopy Sciences Histo-Mount 450 ML
A mixture of xylene - mixed isomers and non hazardous ingredients to offer a very good synthetic mountant. Once dried the refractive index is 1.58.